www.Diamond-Models.gr

[Diamond-Models]

YUKI MODEL C-400 Cornelius PNP wing:1450mm

Technical Data
scale: 1:7,5
windspan: 1.450 mm
Lenght: 990 mm
Weight: 950 g
Material: EPO
Profil: E 195
Servos: 4 x 9 g
Motor: BL
ESC: HW SKYWALKER 40 A

[Diamond-Models]

Νέες Παραλαβές Μαίου απο www.diamond-models.gr

PHOENIX MODEL Extra 300S .40-.55 ARF plane




The Extra 300S has won the World Aerobatic Championship many times.

The full size version flies aerobatics at 300km/h.

Phoenix’s Extra is naturally slower but is engineered to perform equally thrilling maneuvers! scale-like model able to perform flat spin,

knife edge and many other difficult aerobatics.

The Extra 300S is expertly handcrafted from balsa and plywood using only epoxy and CA glues.

You can fly this plane after few hours of installation.

All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc).

You only need to separately purchase the nitro engine and radio system.

Features:

Covered in genuine ORACOVER
Removable top hatch Makes flight battery installation easy for Electric power option
Plug in wings for convenient transportation and storage
Huge access bay for radio installation
Eletric conversion part included with the kit
High quality hardware included
Airfoil section on tail surfaces for added stability
Scale landing gear with high grade aluminium
Super finishing wheel pant and fiber glass cowl

Requires:

Engine: 2-stroke .40-.55 cu in (6.55 - 9.01 cm3)
4-channel radio with compatible receiver
5 Servos

Manufacturer stock No. PH009
Technical data
Length: 1295 mm
Wingspan: 1452 mm
Weight: 2760 g

PHOENIX MODEL Diabolo .60 ARF plane





The Diabolo is a beautifully finished aerobatic airplane with nice and simple construction.

It comes pre-covered in an eye-catching design, you don’t even need to spend any time

for further decoration since all the complicated painting is finished by the factory.

Featuring all balsa construction (fuselage, wings and tails), the Diabolo is light but extremely strong.

It is completely built, requiring minimum assembly. The Diabolo is a great plane very well made and very enjoyable.

Features:

Quality materials and genuine ORACOVER covering
Bolt-on two-piece wing for easy transport and setup at the field
Removable top hatch for easy access to the interior of the plane
Extremely lightweight laser-cut all-wood construction
Durable factory-painted fiberglass cowl and wheel pants
Can be converted for electric flight
Prepainted pilot figure, preinstalled in cockpit
Flies with a wide variety of engines
Can be flight ready in just 2 to 4 hours

Colour chart:

White (21-010)
Ferrari Red (21-023)
Cub Yellow (21-030)
Dark Blue (21-052)
Sky Blue (21-053)

Requires:

Engine: 2-stroke .60 cu in (9.83cm3)
4~9 channel radio with compatible receiver
6 Servos Hitorque

Manufacturer stock No. PH044
Technical data
Length: 1260 mm
Wingspan: 1620 mm
Weight: 3200 g

[Diamond-Models]

PHOENIX MODEL Sbach .46 - .55 ARF plane Wingspan:1405 mm





Introducing

Phoenix’s Sbach 342 is naturally slower but is engineered to perform equally thrilling maneuvers! scale-like model able to perform flat spin, knife edge and many other difficult aerobatics. The Sbach is expertly handcrafted from balsa and plywood using only epoxy and CA glues. You can fly this plane after few hours of installation. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system

Technical data

- Wingspan: 1405mm (55.3 in)
- Length: 1405mm (55.3 in)
- Flying weight: 2800-3000 gr
- Wing area: 39.4 dm2
- Wing loading: 71g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included)
- Spinner size: Plastic 58mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .46-.55 / 2-stroke or .52/4-stroke glow engine (not included)
- Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
- Gravity CG: 95-100 mm (3.7-3.9 in) Back from the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 10mm up/down, 10% expo; High: 12mm up/down, 10% expo
- Control throw Elevators: Low: 10mm up/down, 12% expo; High: 12mm up/down, 12% expo
- Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Scale Aerobatic
RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .46-.55 (not included)
- Lipo cell: 6 cells / 4000 – 5500mAh (not included)
- Esc: 50-70A (not included)
Feature

- Designed for compatibility with both GP and EP flight
- Covered in genuine ORACOVER®
- Bolt-on two-piece wing for easy transport and setup at the field
- Removable canopy for easy change lipo battery and set up radio
- Strong Light Weight Construction
- High-quality hardware package included

MX-2 Wingspan:1210 mm2,4 GHz Ready to fly




RTF version - a complete set of the plane of complex equipment.

The kit RTF includes the following elements:

- Complete model in ARF version
- 5-channel transmitter T5-AR 2.4 GHz with 6-channel receiver-T6 AR 2.4 GHz Mode 2 (gas left)
- Brushless motor with electronic speed controller
- Hub / cap with propeller
- Installed in the model servos with the necessary extensions
- Package Lithium-Polymer power model with a capacity of 1750mAh and voltage 11,1V and charger for 2 or 3-intentional packet Li-Pol, supplied from 12V
- A set of small accessories (hinges, ski lifts, etc.), bolts and tappets
- Manual in Polish

Aerobatic aircraft "MX-2"

Wingspan: 1210 mm
Hull length: 1,106 mm
Wing area: 27.3 dm2
Load wings: 35.16 g / dm 2
Takeoff weight: 960 g
The level of play - for intermediate and experienced modelers

[Diamond-Models]

Νέες Παραλαβές σε Fiala Propellers και διαφορα αξεσουαρ απο www.diamond-Models.gr

[Diamond-Models]

Νέα Παραλαβή σε Racer FPV Ready PnP

MANTIS 280 RACE PNP Carbon-Frame CC3D LED Kamera 5,8 GHz FPV

The MANTIS 280 RACE is a race for the first-person view (FPV) conceived Quadrokopter with carbon frame.

Four brushless motors of the type 2204 with 2,300 U / min / V (KV), four brushless controllers up to 12 A continuous current, the CC3D electronics,a module for the transmission in 5.8 GHz and a camera are already mounted ready for operation.
Also incorporated are the two large LED head lights front and a long light bar behind the model.
Of course, four white and four black propellers 5 x 3 "included.
The dimensions of the multicopter be 220 x 233 x 50 mm, the four rotor arms each 140 mm long,in the diagonal distance between the motors is 280 mm ,
The associated ADRIFT VR FPV glasses whose comfort and design convinced has an adjustable 3-point head strap reduces the unpleasant during longer bear pressure points on the head. The dimensions of the VR ADRIFT be 148 x 176 x 102 mm and has an aspect ratio of 4: 3 with a resolution of 480 x 272 pixels. In addition, multiple languages ​​such. B. English, German, French or Italian for the interface can be selected.
Required accessories: 3S Lipo battery 1350mAh

[Diamond-Models]

Νέες Παραλαβές Ιουνίου απο www.Diamond-Models.gr

[Diamond-Models]

Νέες Παραλαβές Σεπτεμβρίου -Οκτωβρίου στο www.Diamond-Models.gr

http://www.diamond-models.gr/gr/