Απάντηση: www.Diamond-Models.gr
Δημοσιεύτηκε: Κυρ Νοέμ 11, 2012 8:38 pm
- Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
- Bidirectional communication between transmitter and receiver
- 5 different languages (German, English, French, Italian, Spanish, Netherland) possible via software update. For availability of the respective language, see Download area.
- Servo cycle times of 10ms can be selected for digital servos
- Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
- Short aerial, foldable
- Operation and programming based on the proven concepts of mc-19 to mc-24
- A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage
- 12 control functions
- Free assignment of all switches
- 24 model memories
- 7 switches/keys, including 2 3-stage-switches, 3 2-stage switches, 2 keys, 3 analogue switches already installed
- Modes 1 to 4 are freely selectable
- CAP-TOUCH key with key lock function to prevent unintentional operation
- CAP-TOUCH display change from main menu to telemetry main menu using the ESC key
- Numerous telemetry display, programming, and analysis functions directly in the transmitter display
- Voice output can be called up via freely programmable switches
- 7 flight phases can be programmed
- Extensive programmes for fixed-wing and helicopter models
- Swashplate limiter
- Voith-Schneider limiter, similar to a swashplate limiter (later after update)
- Door Sequencer e.g. to automatically extend landing gear or operate flap drives with process control (later after update)
- Servo travel adjustment/B>: can be set separately for all servo channels and for each final value
- Sub-trim to set the neutral position of all servos
- 2-stage expo/dual-rate system, individually adjustable, can be switched during flight
- Mixer functions Programmable failsafe function »Hold« or »Advance to pre-set positions« adjustable separately for each individual servo channel
- Stop watches / countdown timers with alarm function
- Model copy function for model memories
The set includes: Graupner HoTT mx-20 microcomputer telemetry transmitter with built-in NiMH 2000 mAh transmitter battery, Graupner HoTT GR-24 receiver, and 200mA transmitter charger, µSD-card, USB-cable General HoTT features:
- Simple, extremely fast binding
- Range test and warning function
- Low-voltage warning
- Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
- Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with the HoTT-Smartbox
- Binding of any number of receivers for channel expansion (max. of 32 channels)
- Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
- Maximum immunity to interference through optimised frequency hopping and broad channel spread
- Intelligent data transmission with correction function
- Extremely fast rebinding, even at max. distance
- Telemetry analysis in real time
- Over 200 systems can be used simultaneously
- Future-proof through update capability via USB interface
