Gaui Hurricane 550
Δημοσιεύτηκε: Τετ Απρ 09, 2008 10:11 pm
Θα ηθελα να κανω μια συντομη παρουσιαση του ελικοπτερου με το οποιο επελεξα να κανω τα πρωτα βηματα ως αρχαριος.
Κι αυτο δεν ειναι αλλο απ το Hurricane 550 της Gaui, εταιρεια που μας ερχεται απ την Τaiwan και η οποια εχει κανει με αυτο το μοντελο την εκπληξη στον χωρο των ηλεκτρικων ε/π.
Τα βασικα στοιχεια που παραθετει ο κατασκευαστης ειναι τα ακολουθα:
The Lightest-weight medium-sized EP helicopter.
The best power to weight ratio gives excellent 3D capability .
The cheapest battery cost.( 2 packs 3S1P in series, even your stock batteries for 450 EP heli work fine)
Multi-stage gear reduction system results in a streamline cabin and canopy.
Push-pull linkages on ECCPM system limits any play for sharp control response.
Dupont plastic and fiberglass composite main frame.
Precision CNC anodized aluminum swash plate.
Fully equipped ball bearings.(43 bearings)
Seesaw head with bell-hiller system.
Only a short time needed for completion. (90% factory assembled)
Belt driven tail rotor.
Extensive CNC upgrade parts and option parts available.
Specification:
Overall length: 1060mm (including cabin & canopy)
Main rotor diameter: 1110mm
Main blade length: 475~550mm
Tail rotor diameter: 222mm
Flybar paddle: 84*45*6mm
Tail blade length: 80mm
Overall height: 305 mm
Overall width: 85 mm
Flying weight: 1950g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: wooden 500mm(included) or fiber(option)
Flying duration: 8 minutes with 11.1v/2200mah Li-Po battery 2 packs in series(22.2v)
Κι αυτο δεν ειναι αλλο απ το Hurricane 550 της Gaui, εταιρεια που μας ερχεται απ την Τaiwan και η οποια εχει κανει με αυτο το μοντελο την εκπληξη στον χωρο των ηλεκτρικων ε/π.
Τα βασικα στοιχεια που παραθετει ο κατασκευαστης ειναι τα ακολουθα:
The Lightest-weight medium-sized EP helicopter.
The best power to weight ratio gives excellent 3D capability .
The cheapest battery cost.( 2 packs 3S1P in series, even your stock batteries for 450 EP heli work fine)
Multi-stage gear reduction system results in a streamline cabin and canopy.
Push-pull linkages on ECCPM system limits any play for sharp control response.
Dupont plastic and fiberglass composite main frame.
Precision CNC anodized aluminum swash plate.
Fully equipped ball bearings.(43 bearings)
Seesaw head with bell-hiller system.
Only a short time needed for completion. (90% factory assembled)
Belt driven tail rotor.
Extensive CNC upgrade parts and option parts available.
Specification:
Overall length: 1060mm (including cabin & canopy)
Main rotor diameter: 1110mm
Main blade length: 475~550mm
Tail rotor diameter: 222mm
Flybar paddle: 84*45*6mm
Tail blade length: 80mm
Overall height: 305 mm
Overall width: 85 mm
Flying weight: 1950g (It may vary according to size of a battery pack and R/C gears.)
Main rotor blades: wooden 500mm(included) or fiber(option)
Flying duration: 8 minutes with 11.1v/2200mah Li-Po battery 2 packs in series(22.2v)