MOTER ΑΠΟ HELI ΣΕ ΑΕΡΟΠΛΑΝΟ
MOTER ΑΠΟ HELI ΣΕ ΑΕΡΟΠΛΑΝΟ
Ταιριαζει ελικοπτερικο μοτερ (OSMAX 37) σε αεροπλανο CALMATO 40 SPOORT;
Απάντηση: MOTER ΑΠΟ HELI ΣΕ ΑΕΡΟΠΛΑΝΟ
..., ναι κανει, θα εχεις και καλλιτερη ψηξη με τα παραπανω fin που εχει λογω ελικοπτερικης κεφαλης... :)
Απάντηση: MOTER ΑΠΟ HELI ΣΕ ΑΕΡΟΠΛΑΝΟ
..να και οι προδιαγραφες του 46αρη, για να συγκρινεις και να καταλαβεις, νομιζω θα εισαι οκ..._Β_Ο
46LA RC Engine
The standard in sport engine technology, in a unique streamlined design.
Features
1-piece crankcase
Crankshaft is set in one long bronze Oilite bushing (no bearings)
Schnuerle porting (AKA Schnuerle scavenging)
Side exhaust
Nylon backplate with remote needle valve
40D carburetor
Aluminum piston with Nickel-plated brass cylinder liner.
Two year limited manufacturers warranty
Includes
One expansion-style muffler #E-3030
One instruction manual and sticker sheet
One assembled engine with glow plug
Two 3x30mm phillips head screws to bolt muffler to engine
Specs
Construction: Aluminum 1-piece crankcase, piston, cylinder head
Bore: 23.0mm (0.906")
Stroke: 18.4mm (.724")
Horsepower: 1.2 BHP at 15,000 RPM
Distance from remote needle to end of crankshaft: 4.5" (114mm)
Distance from center of engine to drive hub: 2.0" (51.2mm)
Distance from center of engine to end of crankshaft: 3.0" (76.3mm)
Height from crankcase bottom to top of cylinder head: 3.3" (84.7mm)
Height/crankshaft center to top of cylinder head: 2.7" (69mm)
Width including mounting ears: 1.9" (48mm)
Width not including mounting ears: 1.2" (32mm)
Width between mounting holes same side: 0.69" (17.5mm)
Width between mounting holes opposite side: 1.6" (40.5mm)
Width between muffler mounting holes: 1.4" (36mm)
Width of exhaust opening: 1.1" (29mm)
Height of exhaust opening: 0.3" (7mm)
Diameter of muffler body: 1.3" (33.5mm)
Angle of muffler in relation to engine: 4°
Weight: 272g (9.6oz without muffler)
Crankshaft Thread Size: 1/4-28
Recommended Props: Break In: 11x6
Trainer and Sport Models: 11x6, 11x7
Scale Models: 12x5, 12x6
Practical RPM Range: 2,000 - 16,000 RPM (This engine will not turn this many RPM on the ground) RPM curve is when the engine unloads.
Don't forget...
#8 Glow Plug
Fuel Tubing
Part Number: OSMG0047
46LA RC Engine
The standard in sport engine technology, in a unique streamlined design.
Features
1-piece crankcase
Crankshaft is set in one long bronze Oilite bushing (no bearings)
Schnuerle porting (AKA Schnuerle scavenging)
Side exhaust
Nylon backplate with remote needle valve
40D carburetor
Aluminum piston with Nickel-plated brass cylinder liner.
Two year limited manufacturers warranty
Includes
One expansion-style muffler #E-3030
One instruction manual and sticker sheet
One assembled engine with glow plug
Two 3x30mm phillips head screws to bolt muffler to engine
Specs
Construction: Aluminum 1-piece crankcase, piston, cylinder head
Bore: 23.0mm (0.906")
Stroke: 18.4mm (.724")
Horsepower: 1.2 BHP at 15,000 RPM
Distance from remote needle to end of crankshaft: 4.5" (114mm)
Distance from center of engine to drive hub: 2.0" (51.2mm)
Distance from center of engine to end of crankshaft: 3.0" (76.3mm)
Height from crankcase bottom to top of cylinder head: 3.3" (84.7mm)
Height/crankshaft center to top of cylinder head: 2.7" (69mm)
Width including mounting ears: 1.9" (48mm)
Width not including mounting ears: 1.2" (32mm)
Width between mounting holes same side: 0.69" (17.5mm)
Width between mounting holes opposite side: 1.6" (40.5mm)
Width between muffler mounting holes: 1.4" (36mm)
Width of exhaust opening: 1.1" (29mm)
Height of exhaust opening: 0.3" (7mm)
Diameter of muffler body: 1.3" (33.5mm)
Angle of muffler in relation to engine: 4°
Weight: 272g (9.6oz without muffler)
Crankshaft Thread Size: 1/4-28
Recommended Props: Break In: 11x6
Trainer and Sport Models: 11x6, 11x7
Scale Models: 12x5, 12x6
Practical RPM Range: 2,000 - 16,000 RPM (This engine will not turn this many RPM on the ground) RPM curve is when the engine unloads.
Don't forget...
#8 Glow Plug
Fuel Tubing
Part Number: OSMG0047